top of page

The Corrosion-Free Alternative to Steel Reinforcement in Concrete Infrastructure

Oct 28
6 min read

Concrete reinforced with steel has been the default structural combination in civil engineering for over a century. It works — until the steel corrodes. Chloride ingress from seawater, de-icing salts, and aggressive groundwater reaches the steel reinforcement bar embedded in concrete, initiates corrosion, and generates iron oxide expansion that cracks and spalls the concrete cover above it. The result is the concrete cancer visible on bridges, sea walls, car parks, and coastal structures across the UK: cracked and delaminating concrete surfaces that indicate steel reinforcement corrosion proceeding beneath. FRP rebar replaces steel reinforcement bar with a material that does not corrode in chloride, alkaline, or aggressive groundwater environments. It is lighter than steel, non-conductive, non-magnetic, and transparent to radar and electromagnetic systems. In the UK infrastructure programme, where bridge rehabilitation, coastal defence renewal, and the repair of deteriorating concrete structures represents billions of pounds of committed expenditure, FRP rebar is the specification that removes the corrosion mechanism from the reinforced concrete structure from day one.

Published by Reinforce Technology  |  28 October 2026


Corrosion of steel reinforcement is the primary cause of premature concrete structure failure in the UK and globally. The cost of concrete infrastructure repair and replacement driven by steel rebar corrosion runs into billions of pounds annually in the UK alone, with highway bridges, coastal sea defences, marine structures, and car park decks among the most affected asset classes. The mechanism is well understood: chloride ions penetrate the concrete cover, reach the steel reinforcement, disrupt the passive oxide layer that protects steel in the alkaline concrete environment, and initiate corrosion that expands to crack and ultimately destroy the concrete above. Once corrosion initiates, it is progressive and difficult to arrest without significant intervention (ScienceDirect, 2023). FRP rebar addresses the mechanism, not the symptom: a reinforcement material that does not corrode in chloride environments removes the failure mechanism from the structure entirely, rather than managing its progression through inspection and repair.

Construction workers lay rebar on a coastal bridge under blue sky, with ocean, cliffs, and a lighthouse in the background.
FRP rebar as a corrosion-immune alternative to steel reinforcement in concrete bridges, sea walls, coastal structures, and car park decks: no chloride-induced corrosion, no concrete spalling driven by rebar expansion, 75% lighter than steel at equivalent diameter, non-conductive, and non-magnetic for structures requiring electromagnetic transparency. Reinforce Technology will be adding FRP rebar to its product catalogue.

Why Steel Rebar Corrodes and What It Costs


Steel reinforcement bar is protected from corrosion in freshly placed concrete by the high alkalinity of the cement paste surrounding it, which maintains a passive oxide layer on the steel surface. That protection is conditional: it depends on the concrete cover remaining intact, dense, and alkaline throughout the service life of the structure. In practice, carbonation of the concrete cover over time reduces the alkalinity of the cement matrix, and chloride ions from seawater, de-icing salt spray, or aggressive groundwater diffuse through the concrete to the level of the steel reinforcement. Once the chloride threshold at the steel surface is exceeded, the passive layer breaks down, corrosion initiates, and the expansion of iron oxide corrosion products generates tensile stresses in the surrounding concrete that crack and eventually spall the cover (ScienceDirect, 2023).


The repair of chloride-induced concrete corrosion is expensive, disruptive, and in many cases only temporarily effective because the chloride contamination of the concrete surrounding the repaired zone remains in place and continues to drive corrosion in adjacent areas after the repair. For bridge owners, highway authorities, port operators, and local authorities managing coastal structures, the ongoing cost of concrete repair driven by steel rebar corrosion is a sustained capital demand that reduces the resources available for new infrastructure investment. FRP rebar does not corrode in chloride environments. Specifying FRP rebar at the design stage of a new structure, or during reconstruction of an existing one, removes the repair liability from the asset for its full design life.


The Properties of FRP Rebar


FRP rebar for concrete reinforcement is manufactured from continuous glass fibre rovings (GFRP), carbon fibre rovings (CFRP), or basalt fibre rovings (BFRP) impregnated with a vinyl ester or epoxy resin matrix and formed into a bar profile with a deformed or helically wound surface for mechanical bond to the surrounding concrete. The most widely specified type in civil infrastructure applications is GFRP (glass fibre reinforced polymer) rebar, which offers the most favourable balance of tensile strength, cost, and corrosion immunity for the structural and budgetary requirements of highway, coastal, and water infrastructure projects.


GFRP rebar has a tensile strength approximately four times that of equivalent diameter mild steel rebar, which allows structural designs to achieve the required reinforcement ratio with smaller diameter bars or reduced bar spacing. The elastic modulus of GFRP rebar is lower than steel, which is the primary design consideration that requires attention in FRP-reinforced concrete design: deflection and crack width must be checked against the applicable design standard for the specific loading and span conditions of the structure. FRP rebar design is governed by established international standards including ACI 440 in North America and the increasingly adopted BS EN ISO standards for FRP reinforcement in concrete structures, which provide the structural design methodology for engineers specifying FRP rebar in UK civil infrastructure projects (IntechOpen, 2022).


Applications in UK Infrastructure


The applications for FRP rebar in UK infrastructure follow directly from the locations where steel rebar corrosion is most damaging and most costly to repair. Coastal sea defences, harbour walls, jetty decks, and marine retaining structures are in continuous contact with seawater chloride and represent some of the most aggressive corrosion environments for steel reinforcement in UK civil engineering. FRP rebar in these structures removes the corrosion mechanism entirely, delivering design lives of 75 to 100 years in continuous seawater exposure where steel-reinforced concrete of equivalent specification would require major rehabilitation within 25 to 40 years.


Highway bridge decks and parapets exposed to de-icing salt spray represent the largest single category of steel rebar corrosion damage in the UK road network. National Highways and local highway authorities spend hundreds of millions of pounds annually on concrete bridge repair driven by chloride-induced rebar corrosion. New bridge decks and parapets specified with FRP rebar eliminate that repair liability from the design stage. In water retaining structures, including water treatment tanks, reservoir walls, and pumping station bases, FRP rebar is non-conductive and does not contribute to electrochemical corrosion driven by stray electrical currents in the environment of electrical pumping and dosing equipment. In MRI facilities and electromagnetic compatibility sensitive structures, FRP rebar is non-magnetic and radar-transparent, allowing the structure itself to be used in locations where steel reinforcement would interfere with the equipment or systems it houses.


Installation and Handling Advantages


FRP rebar at approximately 75% less weight than steel rebar at equivalent diameter changes the manual handling requirement for reinforcement cage assembly significantly. Steel rebar in large diameter sizes requires mechanical handling equipment for movement and placement; GFRP rebar of the same diameter can be handled manually by one or two workers, reducing the crane and plant requirement during reinforcement cage assembly and improving the speed and flexibility of the reinforcement installation programme. FRP rebar can be cut with standard angle grinder or diamond blade tools on site without specialist cutting equipment, and the bars can be bent to specific radii using purpose-made bending tools for the specific resin system. On construction sites in confined locations, coastal environments, or restricted access structures where the delivery of heavy steel reinforcement bundles is logistically complex, the lighter weight and easier handling of FRP rebar reduces programme risk and installation cost.


FRP Rebar: Coming to Reinforce Technology


Reinforce Technology will be adding FRP rebar to its product catalogue. As part of our ongoing expansion of the FRP infrastructure product range, GFRP rebar for concrete reinforcement in coastal, highway, water, and specialist infrastructure applications will shortly be available alongside our existing range of FRP grating, cable tray, handrail, and structural profiles. If you are specifying a concrete structure in a chloride, aggressive groundwater, or electromagnetic-sensitive environment and want to discuss FRP rebar as the reinforcement specification, contact Reinforce Technology now and we will provide product and specification information ahead of the full catalogue launch.


FRP rebar specification for structural concrete applications requires design in accordance with the applicable structural design standard for FRP-reinforced concrete, including checks on deflection, crack width, and bond performance specific to the FRP reinforcement type and the loading and exposure conditions of the structure. Structural design with FRP rebar should be carried out by a qualified structural engineer experienced in FRP reinforced concrete design. Product availability and specification data will be confirmed at catalogue launch.


References


IntechOpen (2022) 'Fibre-Reinforced Polymer (FRP) in Civil Engineering', in IntechOpen Engineering Series. Available at: https://www.intechopen.com/chapters/84203 [Accessed: 28 October 2026]. [GFRP rebar tensile strength approximately four times mild steel at equivalent diameter; 70-75% lighter than steel; non-conductive; non-magnetic; corrosion-immune in chloride, alkaline, and aggressive groundwater environments; design life of 75-100 years in seawater and de-icing salt exposure; ACI 440 and BS EN ISO design standards for FRP-reinforced concrete; applications in coastal, highway bridge, water retaining, and electromagnetic-sensitive structures].


ScienceDirect (2023) 'Chloride-induced corrosion of steel reinforcement in UK coastal and highway bridge concrete structures', Construction and Building Materials, 409, pp. 1-19. Available at: https://www.sciencedirect.com/science/article/pii/S0950061823015678 [Accessed: 28 October 2026]. [Chloride diffusion and corrosion initiation mechanisms in reinforced concrete; passive layer breakdown at chloride threshold concentrations; iron oxide expansion and concrete cover cracking and spalling; repair cost and frequency for chloride-induced concrete deterioration in UK highway bridges and coastal structures; GFRP rebar corrosion immunity in equivalent chloride exposure conditions; comparison of design life for steel versus FRP reinforced concrete in aggressive exposure environments].

Comments


bottom of page