
GFRP Rebar
Standard Range GFRP Rebar for Corrosive Environment
Standard range 4 to 40 mm
GFRP Rebar From Reinforce Technology

Steel rebar fails in salt, chlorides and chemicals because it rusts, swells and splits the concrete. Our glass fibre reinforced polymer (GFRP) rebar has nothing to rust, so reinforced concrete in marine, coastal, de icing and wastewater exposure keeps its strength with far less repair.
4 to 40 mm
Standard diameters, 17 sized
Up to 1,069 MPa
Standard diameters, 17 sized
70% Lighter
The steel rebar, 385 g/m against about 1,580 g/m at 16mm
GFRP Rebar Size and Tensile Capacity
Standard range from our factory technical datasheet. Tensile strength is calculated on the effective cross section.

Modulus of elasticity 45 GPa minimum. Double shear strength 150 MPa. Diameter tolerance plus or minus 0.5mm, length tolerance plus or minus 10mm, straightness under 3 mm per meter, end cut square at 90 degrees.
GFRP Rebar Size vs Steel Rebar
The trade off in one table. Strong in tension, immune to corrosion, lighter, and less stiff than steel.

Steel values are typical for common steel rebar. The datasheet for your chosen bar, confirmed at quotations, governs design.
GFRP Rebar Size vs Steel Rebar
Marine and Coastal

Offshore Wind

Solar and Energy Foundations

Water and Wastewater

Tunnelling / Rail

Airport and Defence

Bridges / Roads

Chemical and Industrial

