top of page

FRP vs Hot-Dip Galvanised Steel: The Whole-Life Cost Case for Corrosion-Immune Access Infrastructure

6 days ago
6 min read

Hot-dip galvanised steel is the default specification for access grating, cable tray, and handrail in the majority of UK industrial and infrastructure projects. It is familiar, structurally well understood, and competitive on initial material cost. It is also dependent on a zinc coating that depletes in corrosive environments at a rate determined by the aggressiveness of the exposure, and once that coating is gone, the base steel corrodes at the full rate of unprotected carbon steel in whatever environment surrounds it. FRP grating, cable tray, and handrail have no coating to deplete: the corrosion resistance of the glass fibre and resin composite is a property of the material itself, not a surface treatment applied to it. In environments where galvanised steel requires recoating, inspection, and replacement within ten to twenty years of installation, FRP provides equivalent structural and functional performance for forty to fifty years without maintenance intervention. The comparison between the two materials is not simply a first-cost comparison: it is a whole-life cost question, and in corrosive environments the answer consistently favours FRP over the asset life of the installation.

Published by Reinforce Technology  |  16 November 2026


Galvanising applies a zinc coating to steel by immersing fabricated steel sections in molten zinc, producing a metallurgically bonded zinc layer that provides cathodic protection to the underlying steel. In a neutral atmospheric environment, that zinc layer depletes slowly through natural weathering, providing many decades of corrosion protection to the steel beneath it. In aggressive environments, the depletion rate accelerates: chloride-saturated coastal and marine atmospheres, acid environments in chemical and wastewater processing, H2S in sewer and oil and gas applications, and the combination of moisture and chemical vapour in industrial process areas all increase the rate at which the zinc coating is consumed, reducing the service life of the galvanised finish and bringing forward the point at which the base steel is exposed and unprotected corrosion begins (ScienceDirect, 2023). FRP contains no zinc coating and no steel substrate: the material that is exposed to the corrosive environment is the glass fibre and resin composite from which the product is manufactured, and that composite is chemically inert in the environments where galvanised steel corrodes most aggressively.v

v

Side-by-side view of a metal industrial walkway over water, one clean and one rusted, with pipes, railings, and hills beyond.
FRP moulded grating, cable tray, and handrail versus hot-dip galvanised steel in corrosive industrial and infrastructure environments: FRP has no zinc coating to deplete, no base steel to corrode when the coating fails, and no maintenance cycles to manage over a 40 to 50 year design life in the environments where galvanised steel requires recoating and replacement within 5 to 15 years.

How Hot-Dip Galvanising Works and Where It Fails


The zinc coating applied by hot-dip galvanising provides corrosion protection through two mechanisms: a physical barrier that prevents moisture and corrosive agents from reaching the steel substrate, and cathodic protection through the electrochemical preference of zinc to corrode sacrificially in preference to the steel it covers. Both mechanisms depend on the zinc coating remaining intact and sufficiently thick to continue providing protection. The depletion of the zinc layer through atmospheric weathering, chemical attack, and mechanical wear is therefore the primary determinant of the service life of galvanised steel access infrastructure in any corrosive environment.

In a rural or benign industrial atmospheric environment, hot-dip galvanised steel can provide fifty or more years of effective corrosion protection before the zinc coating is sufficiently depleted to allow base steel corrosion. In coastal and marine environments, where airborne chloride salt accelerates zinc dissolution, the effective service life of galvanised access grating and handrail reduces to ten to twenty years in the splash zone and five to fifteen years in direct tidal exposure. In chemical and wastewater environments where acid vapours, H2S, and aggressive process chemicals are present, depletion can be faster still. Once zinc depletion exposes the base steel, corrosion of the underlying carbon steel proceeds at the full atmospheric corrosion rate for unprotected steel in that environment, which in coastal and chemical conditions is substantially higher than in a neutral atmosphere (IntechOpen, 2022).


The True Cost of Galvanised Steel in Corrosive Environments


The initial material cost of hot-dip galvanised steel grating, cable tray, and handrail is typically lower than equivalent FRP systems. That initial cost advantage is the basis on which galvanised steel is frequently specified for access infrastructure in applications where the corrosive environment makes it a poor long-term choice. The whole-life cost of galvanised steel access infrastructure in a corrosive environment includes not only the initial material and installation cost but the inspection, recoating, and replacement costs that the galvanised system will require throughout the design life of the asset. In a coastal or chemical industrial environment with an asset design life of twenty-five to fifty years, those maintenance costs typically exceed the initial installation cost of the galvanised system within the first replacement cycle, producing a whole-life cost that is substantially higher than an FRP system specified at the outset that requires no maintenance intervention over the same period.


Beyond the direct cost of maintenance materials and labour, the indirect costs of maintaining galvanised steel access infrastructure in operational industrial and infrastructure environments are significant. Maintenance access to grating panels, cable tray sections, and handrail on operational water treatment works, offshore installations, chemical plants, and rail infrastructure requires shutdown or isolation of the operational activity below or adjacent to the access structure being maintained. The cost of that operational disruption, including production downtime, isolation procedure costs, and the safety risk of maintenance activities on operational industrial sites, is rarely included in the initial material cost comparison but is frequently the largest single cost component of the maintenance lifecycle of a galvanised steel access infrastructure system in an operational industrial environment. FRP access infrastructure that requires no recoating or corrosion-driven maintenance over its design life eliminates that operational disruption cost from the asset's lifecycle.


When to Specify FRP Instead of Galvanised Steel


The environments in which FRP consistently delivers better whole-life value than hot-dip galvanised steel are those where the zinc coating depletion rate is high enough to require maintenance intervention within the first ten to fifteen years of the asset life. These include coastal and marine locations where airborne chloride accelerates zinc dissolution; water treatment works and sewer infrastructure where H2S, chlorine, and process chemicals attack the galvanised coating; chemical processing and pharmaceutical facilities where solvent, acid, and alkali vapours are present in the working environment; offshore and industrial environments where the combination of marine atmosphere and hydrocarbon exposure creates a doubly aggressive corrosion condition; and food and beverage production facilities where the acidic cleaning agents used for hygienic cleaning of production environments attack galvanised surfaces.

In genuinely benign environments where the galvanised zinc coating will last for thirty or more years without significant depletion, the cost case for FRP over galvanised steel weakens and the lower initial cost of galvanised systems becomes the dominant consideration. The practical guidance for specifiers is straightforward: assess the corrosivity of the specific installation environment for zinc in the first instance, and if that assessment indicates zinc depletion within twenty years, FRP is the better whole-life specification for access grating, cable tray, and handrail at the design stage of the project.


FRP Infrastructure from Reinforce Technology


Reinforce Technology supplies FRP moulded grating in 38x38mm and 50x50mm mesh sizes, pultruded GRP grating, FRP cable tray and ladder rack, FRP handrail systems, and FRP structural profiles as direct replacements for hot-dip galvanised steel access infrastructure in corrosive industrial, marine, water treatment, and outdoor environments. Polyester resin grade for general corrosive and outdoor applications and vinyl ester resin grade for elevated chemical and H2S resistance are both available. Contact Reinforce Technology to discuss the whole-life case for FRP versus galvanised steel for your specific installation environment and asset life requirement.


Whole-life cost comparisons between FRP and hot-dip galvanised steel access infrastructure should be assessed for the specific corrosivity of the installation environment, the design life of the asset, and the maintenance access and operational disruption costs applicable to the specific site and operational context. Reinforce Technology's technical team can advise on the appropriate specification and resin grade for the corrosion environment of the project.


References


IntechOpen (2022) 'Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering Applications', in IntechOpen Engineering Series. Available at: https://www.intechopen.com/chapters/84203 [Accessed: 16 November 2026]. [FRP corrosion immunity as inherent material property versus protective coating-dependent galvanised steel; 75% weight saving versus galvanised steel equivalents; non-conductive and non-sparking FRP properties; 40 to 50 year FRP design life in aggressive corrosive environments; whole-life cost advantage of FRP over galvanised steel in environments requiring multiple recoating cycles within the asset design life].


ScienceDirect (2023) 'Zinc coating depletion rates and service life prediction for hot-dip galvanised steel access infrastructure in corrosive industrial and coastal environments', Corrosion Science, 224, pp. 1-17. Available at: https://www.sciencedirect.com/science/article/pii/S0010938X23006234 [Accessed: 16 November 2026]. [Hot-dip galvanising zinc coating depletion mechanisms in chloride, H2S, acid, and aggressive industrial atmospheric environments; cathodic protection and barrier protection mechanisms of zinc coating on structural steel; zinc depletion rates in coastal splash-zone, marine atmospheric, chemical, and wastewater environments; service life modelling for galvanised steel grating and handrail at varying atmospheric corrosivity classifications; whole-life cost comparison of galvanised steel versus FRP access infrastructure at 25 and 50 year design life horizons in C4 and C5 corrosivity environments].

Comments


bottom of page