Safety & Preparation
Always wear protective gear for your eyes, skin, and hands. Instructions are available in PDF, video, and user guide formats.
1. Prep the Area: Ensure tile joints are clean and dry.
2. Wax or Tape: Apply priming wax along grout lines. Use tape for textured tiles or trim to avoid sticking.
3. Load the Tube: Secure GoPoxy tube and nozzle into the gun.
Application
1. Mix First 30cm: Squeeze out the first 30cm to ensure proper mix.
2. Temperature Tip: If hard to dispense, warm the tube. If too runny, cool it.
3. Work in Sections: Complete in 15–30 minute intervals.
4. Fill Joints: Apply slowly and use tools to press grout into the joints.
After Application
1. Check & Fix: Adjust grout before it fully cures.
2. Remove Excess: When hardened, scrape away extra grout.
3. Save Leftovers: Cap unused grout and attach a new nozzle for reuse.
Curing Times:
0–12°C: 8–12 hours
12–24°C: 6–8 hours
Safety & Preparation
Always wear protective gear for your eyes, skin, and hands. Instructions are available in PDF, video, and user guide formats.
1. Prep the Area: Ensure tile joints are clean and dry.
2. Wax or Tape: Apply priming wax along grout lines. Use tape for textured tiles or trim to avoid sticking.
3. Load the Tube: Secure GoPoxy tube and nozzle into the gun.
Application
1. Mix First 30cm: Squeeze out the first 30cm to ensure proper mix.
2. Temperature Tip: If hard to dispense, warm the tube. If too runny, cool it.
3. Work in Sections: Complete in 15–30 minute intervals.
4. Fill Joints: Apply slowly and use tools to press grout into the joints.
After Application
1. Check & Fix: Adjust grout before it fully cures.
2. Remove Excess: When hardened, scrape away extra grout.
3. Save Leftovers: Cap unused grout and attach a new nozzle for reuse.
Curing Times:
0–12°C: 8–12 hours
12–24°C: 6–8 hours